NEXUS: COMMAND LINE: CONSISTENCY PARAMETERS


WHAT ALL ARE THE PARAMETERS WHICH NEEDS TO BE CHECKED TO CONVEREGE VPC ?

There is no requirement to memorize all the parameters, which needs to be matched among Nexus Peer  Devices.

As shown below, output will show all the parameters to be matched, for both the Peer Devices

 

N7K1# sh vpc consistency-parameters ?

global     Global Parameters

interface Specify interface

vlans     Vlans

vpc       Virtual Port Channel configuration

 

N7K1# sh vpc consistency-parameters global

Type 1 : vPC will be suspended in case of mismatch

Name                       Type     Local Value           Peer Value

STP Mode                   1         Rapid-PVST             Rapid-PVST

STP Disabled               1      None                   None

STP MST Region Name         1     “”                     “”

STP MST Region Revision     1     0                     0

STP MST Region Instance to 1

VLAN Mapping

STP Loopguard               1          Disabled               Disabled

STP Bridge Assurance       1     Enabled               Enabled

STP Port Type, Edge         1     Normal, Disabled,     Normal, Disabled,

BPDUFilter, Edge BPDUGuard     Disabled               Disabled

STP MST Simulate PVST       1     Enabled               Enabled

VTP domain                 2

VTP version                2     1                     1

VTP mode                   2         Server                Server

VTP password               2

VTP pruning status         2     Disabled               Disabled

Interface-vlan admin up     2     320,696               320

Interface-vlan routing     2     1,320,696             1,320

capability

Allowed VLANs               –     1,320,696-697         1,320,696-697

 

N7K1# sh vpc consistency-parameters vlans

Name                       Type Reason Code             Pass Vlans

STP Mode                   1     success               0-4095

STP Disabled               1     success               0-4095

STP MST Region Name         1     success              0-4095

STP MST Region Revision     1     success               0-4095

STP MST Region Instance to 1     success               0-4095

VLAN Mapping

STP Loopguard               1     success               0-4095

STP Bridge Assurance       1   success               0-4095

STP Port Type, Edge         1     success               0-4095

BPDUFilter, Edge BPDUGuard

STP MST Simulate PVST       1     success               0-4095

Pass Vlans                 –                           0-4095

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s