TOTAL NUMBER OF PAGES IN WLC: NINE
PAGES COVERED IN POST
==> MONITOR
PAGE – MONITOR – SUMMARY
PAGE – MONITOR – SUMMARY
COMMENTS
==> Uptime shown is more than 207 days
==> Local Mobility Group shows the Mobility group name
==> This WLC can support maximum of 15 LAP’s, as per license installed
==> Port status of 1,2,3 & 4 is shown. Port 1 & 2 are up, whereas port 3 & 4 are down.
==> Software version is 7.0.230.0
==> CPU usage is also given
PAGE – MONITOR – SUMMARY
COMMENTS:
==> In Access Point Summary, All APs = 5, which is showing the total number of associated AP’s. Click on details for further information.
==> In Access Point Summary, 802.11 a/n & 802.11 b/g/n are showing different bands. In front of them, total number of AP’s are given supporting these bands
==> In Client summary, shows the user’s connected to WLC. Click on details for further information.
PAGE – MONITOR – SUMMARY
COMMENTS
==> Details shown are list of all AP’s
==> Authentication used between AP & WLC is Internal Authorization. Internal Authorization means authentication using certificates, not using any external server. Here, certificate type is MIC. Other options are SSC, LSC.
==> Uptime for all the Ap’s are shown
==> AP mode is local. Other possible mode can be Flex connect mode.
PAGE – MONITOR – STATISTICS – AP JOIN
PAGE – MONITOR – STATISTICS – PORTS
PAGE – MONITOR – STATISTICS – RADIUS
PAGE – MONITOR – CDP – INTERFACE NEIGHBORS
COMMENTS
==> Here, Gi0/0/1 & Gi0/0/2 are the ports on WLC.
==> In Neighbor name, connected devices host name is shown. Neighbor ip is the ip of connected devices to WLC.
==> Gi0/2 & Gi0/3 are the ports of connected devices
PAGE – MONITOR – CDP – AP NEIGHBORS – CLICK DETAILS
COMMENTS
==> AP Name shows associated AP’s
==> Neighbor Name shows the name of connected devices, which should be a switch. Neighbor address is the ip address of the connected switch. Neighbor port is the connected port on switch.